AN32E
Articulating Non-Overcenter Aerial Device
Altec’s AN non-overcenter articulating aerials feature a low-stow, side-mounted platform. The AN32E offers an extended side reach of 18.5 ft.
This product has been discontinued. The recommended replacement models are the AT37G. If you own this product and need parts and/or service, please contact us.
| General Specifications: |
| Ground to Bottom of Platform*: |
32 ft (9.8 m) |
| Maximum Side Reach: |
18.5 ft (5.6 m) |
| Boom Articulation (Lower Boom): |
0 to 90° |
| Rotation: |
Continuous |
|
Download Spec Sheet
|
| Standard Features: |
- Altec ISO-Grip® Control System
- Non-Overcenter Articulating Aerial Device
- Side-Mounted Platform 24 x 24 x 42 in (610 x 610 x 1067 mm)
- Platform Capacity 350 lb (159 kg)
- Continuous Rotation
- Outrigger Boom Interlock System (with Outrigger Option)
- Positive Platform Leveling
- Full Pressure, Open Center Hydraulic System
- Designed and Manufactured in ISO 9001 Certified Facility
- ANSI, Category C, 46kV and below
- Lower Boom Insert
|
| Optional Features: |
- Diagnostic Pressure Test Kit
- Secondary Stowage System
- Engine Start/Stop – From the Platform, captive air type
- Platform Cover
- Pump – Clutch or PTO
- Throttle System
- Tool Circuit at Tailshelf
- Tool Circuit at Platform
- Platform Tilt – From Lower Controls
- Platform 24 x 30 x 42 in (610 x 762 x 1067 mm)
- Modified A-Frame Outriggers
|
| Recommended Features: |
- Fall Protection System
- Platform Liner
- Platform Cover
- Wheel Chocks
|
*Based on chassis frame height of 40 inches (1016 mm)
Altec Aerial Devices meet or exceed all applicable ANSI Standards as of the date of manufacture. Altec reserves the right to improve models and change specifications without notice or obligation. Altec provides custom options in countries throughout the world. Please contact Altec Worldwide for the options available in your country.
