L37M
Articulating Overcenter Aerial Device
Altec’s L37M overcenter material handling aerial device features a working height to 42 ft and side reach of 29.2 ft.
This product is now obsolete and has been replaced by the L42M.
| General Specifications: |
| Ground to Bottom of Platform*: |
36.7 ft (11.2 m) |
| Maximum Reach, Overcenter: |
29.6 ft (9 m) |
| Maximum Reach, Non-Overcenter: |
0 ft (0 m) |
| Boom Articulation (Lower Boom): |
0 to 98° |
| Rotation: |
Continuous |
|
Download Spec Sheet
|
| Standard Features: |
- Altec ISO-Grip® Control System
- Overcenter Articulating Aerial Device
- Material Handling System with Hydraulic Tilting, Manual Extend Jib
- Insulating, ANSI Category C, 46 kV and Below
- Lower Boom Insulator, 7 in (18 mm)
- Low Stow Platform
- Altec Patented Walking Link
- Continuous Rotation
- Side Mounted Platform 24 x 30 x 42 in (610 x 762 x 1067 mm)
- Platform Capacity 350 lb (159 kg)
- Hydraulic/Mechanical Platform Leveling System
- Hydraulic Platform Tilt
- Full Pressure Open Center Hydraulic System
- Hydraulic Tool Circuit at Boom Tip
- A-Frame Outriggers, One Set
- Outrigger Boom Interlock System
- Outrigger Motion Alarm
- Back Up Alarm
|
| Optional Features: |
- Diagnostic Test Kit
- Throttle Control
- Secondary Stowage
- Engine Start/Stop
- Lower Boom Lifting Eye
- Platform Cover
- Tool Circuit at the Tail Shelf
- Insulating ANSI Category B, 46 kV and below
- Hydraulically Extendible Jib
- Platform Rotator
|
| Recommended Features: |
- Fall Protection System
- Platform Liner
- Wheel Chocks
- Outrigger Pads
|
*Based on chassis frame height of 40 inches (1016 mm)
Altec Aerial Devices meet or exceed all applicable ANSI Standards as of the date of manufacture. Altec reserves the right to improve models and change specifications without notice or obligation. Altec provides custom options in countries throughout the world. Please contact Altec Worldwide for the options available in your country.
