MT66-E76
Articulating Overcenter Aerial Device
The Altec MT66-E76 consists of an overcenter insulating aerial device (46kv), an Altec designed cutting head that provides maximum cuts of 14 in without grapple control and 10 in with grapple control and a radio remote control. This unit was designed to allow right-of-way line clearing from the ground with operators safely away from the drop zone. The MT66-E76 is equipped with a 10 ft elevator providing 76 ft of cutting height.
| General Specifications: |
| Ground to Cutting Head*: |
76 ft (23.2 m) |
| Maximum Reach, Overcenter: |
51.4 ft (15.7 m) |
| Maximum Reach, Non-Overcenter: |
0 ft (0 m) |
| Boom Articulation (Lower Boom): |
0 to 125° |
| Rotation: |
Continuous |
|
Download Spec Sheet
|
| Standard Features: |
- Altec Designed Cutting Head with Grapple
- Allows Cut and Hold or Cut and Drop
- Insulated to 46KV
- Lower Boom Articulation 0 to 125°
- Upper Boom Articulation 0 to 270°
- Scanreco Remote Controller
- Overcenter Aerial Allows Cuts Over Power Lines
- Compact 10 ft (3 m) Compensated Vertical Elevator
|
*Based on chassis frame height of 40 inches (1016 mm)
Altec Aerial Devices meet or exceed all applicable ANSI Standards as of the date of manufacture. Altec reserves the right to improve models and change specifications without notice or obligation. Altec provides custom options in countries throughout the world. Please contact Altec Worldwide for the options available in your country.
