AT40M – JEMS
Learn more about Green Fleet options

AT40M – JEMS

Articulating Telescopic Aerial Device

The AT40M – JEMS comes standard with a single-operator, 400 pound capacity platform with an 800 pound capacity material handling jib. This unit has a 45-foot working height and 30-foot side reach with a 180 degree platform rotator. Try it with the new composite ISO-Boom option to allow the unit’s second stage to be fully retracted while maintaining dielectric integrity and meeting OSHA guidelines for minimum approach distances.

Contact Parts/Service
General Specifications:
Ground to Bottom of Platform*: 40 ft (12.2 m)
Maximum Side Reach: 30.8 ft (9.4 m)
Boom Articulation (Lower Boom): -25 to 75°
Rotation: Continuous
Download Spec Sheet
Standard Features:
  • Altec Arm Jib
  • Fiberglass Upper Boom and Lower Boom Insulator
  • Insulating, ANSI Category C, 46KV and Below
  • Compensated Articulating Arm
  • Continuous Rotation
  • Hydraulic Boom Extension
  • Hydraulic Platform Rotation and Tilt
  • Full Pressure, Open Center Hydraulic System
  • Outrigger Motion Alarm and Outrigger Interlocks
  • Platform Access From Ground
  • Emergency Stop Valves at All Upper and Lower Control Stations
  • Platform 24 x 30 x 42 in Nominal
  • Tool Circuit at Platform
  • Extension Dependent Load Chart
  • Jib Capacity Up To 800 lbs (362.9 kg)
Optional Features:
  • 2-Man Platform with 180° Rotation and 600 lb (272.2 kg) Platform Capacity – Material Handling is Not Available in This Configuration
  • Secondary Stowage System
  • Engine Start /Stop
  • Second Tool Circuit at Platform
  • Tool Circuit Below Rotation
  • Manual Throttle
  • Jib Adapter
  • Phase Lifting Jib Attachment
  • Platform Covers
Recommended Features:
  • Fall Protection System
  • Wheel Chocks
  • Outrigger Pads
Photos

*Based on chassis frame height of 40 inches (1016 mm)

Altec Aerial Devices meet or exceed all applicable ANSI Standards as of the date of manufacture. Altec reserves the right to improve models and change specifications without notice or obligation. Altec provides custom options in countries throughout the world. Please contact Altec Worldwide for the options available in your country.