AT40P – JEMS
Articulating Telescopic Aerial Device
Altec’s AT Series has proven to be the most popular and versatile aerial devices in the marketplace. The AT40P features an added personnel lift.
This product has been discontinued. If you own this product and need parts and/or service, please contact us.
| General Specifications: |
| Ground to Bottom of Platform*: |
39.4 ft (12 m) |
| Maximum Side Reach: |
29.6 ft (9 m) |
| Boom Articulation (Lower Boom): |
-25 to 75° |
| Rotation: |
Continuous |
|
Download Spec Sheet
|
| Standard Features: |
- Altec Arm Jib
- Fiberglass Upper Boom and Lower Boom Insulator
- Insulating, ANSI Category C, 46KV and Below
- Compensated Articulating Arm
- Continuous Rotation
- Hydraulic Boom Extension
- Hydraulic Platform Rotation and Tilt
- Full Pressure, Open Center Hydraulic System
- Outrigger Motion Alarm and Outrigger Interlocks
- Platform Access From Ground
- Emergency Stop Valves at All Upper and Lower Control Stations
- Platform 24 x 30 x 42 in Nominal
- Tool Circuit at Platform
- Extension Dependent Load Chart
- Jib Capacity Up To 800 lbs (362.9 kg)
|
| Optional Features: |
- 2-Man Platform with 180° Rotation and 600 lb (272.2 kg) Platform Capacity – Material Handling is Not Available in This Configuration
- Secondary Stowage System
- Engine Start /Stop
- Second Tool Circuit at Platform
- Tool Circuit Below Rotation
- Manual Throttle
- Jib Adapter
- Phase Lifting Jib Attachment
- Platform Covers
|
| Recommended Features: |
- Fall Protection System
- Wheel Chocks
- Outrigger Pads
|
*Based on chassis frame height of 40 inches (1016 mm)
Altec Aerial Devices meet or exceed all applicable ANSI Standards as of the date of manufacture. Altec reserves the right to improve models and change specifications without notice or obligation. Altec provides custom options in countries throughout the world. Please contact Altec Worldwide for the options available in your country.
