A40P
Telescopic Aerial Device
The Altec A40P telescopic cable placer aerial device features a platform height of 35.7 ft and side reach of 29.4 ft.
This product has been discontinued. The recommended replacement model is the T40P. If you own this product and need parts and/or service, please contact us.
| General Specifications: |
| Ground to Bottom of Platform*: |
35.7 ft (10.9 m) |
| Maximum Side Reach: |
29.4 ft (9 m) |
| Boom Articulation (Lower Boom): |
-20 to 80° |
| Rotation: |
370° Non-Continuous |
|
Download Spec Sheet
|
| Standard Features: |
- Aerial Device with Boomrest
- Telescopic Steel Two Stage Boom, Hydraulically Extended (Non-Insulating)
- 370° Noncontinuous Rotation
- Hydraulic Platform Leveling
- Platform, End-Mounted Steel 29 x 29 x 43.5 in (737 x 737 x 1105 mm) with Impact Wrench Holder
- Fixed Mounted Arms for Pulling Eye and Optional Fairlead
- Pulling Eye
- Platform Capacity 500 lb (227 kg)
- Sideload Capacity 600 lb (272 kg)
- Single Handle Fully Proportional Control
- Engine Start/Stop
- Two Way Voice Communications System
- 120 VAC Electric Circuit at the Boom Tip
- Open Center Hydraulic System
- Pendant Mounted Lower Controls
- 2000 lb (907 kg) Lifting Eye on the Boom
- Emergency Lowering Valve at Platform
|
| Optional Features: |
- Fairlead at Platform
- Reel Lifter, 5000 lb (2268 kg) Lift Capacity
- Cable Stringing Bull Wheel System
- Strand Carrier and Towline Winch (Note) Optional Stringing System and Strand Carrier/Towline Require Different Boomrest
- “D” Block Storage Bracket for Platform
- Platform Curtains
- Heater at Platform
- Secondary Stowage System
- Capstan Winch Mounted on Reel Lifter Arm
|
| Recommended Features: |
- Fall Protection System
- Wheel Chocks for Stationary Operation
|
*Based on chassis frame height of 40 inches (1016 mm)
Altec Aerial Devices meet or exceed all applicable ANSI Standards as of the date of manufacture. Altec reserves the right to improve models and change specifications without notice or obligation. Altec provides custom options in countries throughout the world. Please contact Altec Worldwide for the options available in your country.
