AT30G
Telescopic Aerial Device
Altec’s AT30-G telescopic aerial device features a platform height of 30.9 ft and reach to 23.6 ft.
This product has been discontinued. The recommended replacement models are the AT37G. If you own this product and need parts and/or service, please contact us.
| General Specifications: |
| Ground to Bottom of Platform*: |
30.9 ft (9.4 m) |
| Maximum Side Reach: |
23.6 ft (7.2 m) |
| Rotation: |
Continuous |
|
Download Spec Sheet
|
| Standard Features: |
- Altec ISO-Grip® System
- Telescopic Aerial Device
- Hydraulic Boom Extension
- Hydraulic Platform Leveling
- Insulating, ANSI Category C, 46 kV and Below
- Continuous Rotation
- Platform, 24 x 30 x 42 in (610 x 762 x 1067 mm)
- Platform Capacity – 350 lb (159 kg) Fixed
- 350 lb (159 kg) w/ Rotator
- Fully Metered Single Handle Upper Control
- Full Pressure, Open Center Hydraulic System
- Platform Access From the Ground
- Emergency Lowering Valve
- Tool Circuit at Platform
- Outrigger Boom Interlock System (With Outrigger Option)
- Outrigger Motion Alarm (With Outrigger Option)
- Back-Up Alarm
|
| Optional Features: |
- Non-continuous Rotation
- Secondary Stowage System
- Engine Start/Stop
- Tool Circuit at Tailshelf
- Outriggers,Vertical
- Platform, 24 x 24 x 42 in (610 x 610 x 1067 mm)
- Additional Platform Capacity
- Platform Cover
- Platform Rotator -90° or 180°
|
| Recommended Features: |
- Fall Protection System
- Platform Liner
- Wheel Chocks
- With Outrigger Option: Outrigger Pads
|
*Based on chassis frame height of 40 inches (1016 mm)
Altec Aerial Devices meet or exceed all applicable ANSI Standards as of the date of manufacture. Altec reserves the right to improve models and change specifications without notice or obligation. Altec provides custom options in countries throughout the world. Please contact Altec Worldwide for the options available in your country.
