AT40C
Telescopic Aerial Device
Altec’s AT40C aerial cable placer features a platform height of 35.1 ft and side reach to 29 ft.
This product has been discontinued. The recommended replacement model is the T40P. If you own this product and need parts and/or service, please contact us.
| General Specifications: |
| Ground to Bottom of Platform*: |
35.1 ft (10.7 m) |
| Maximum Side Reach: |
29 ft (8.8 m) |
| Rotation: |
720° Non-Continuous |
|
Download Spec Sheet
|
| Standard Features: |
- Aerial Device, Two Stage Steel Boom (Non-Insulating)
- 720° Non-Continuous Rotation
- Steel Platform, 29 x 29 x 43.5 in (737 x 737 x 1105 mm) with Tool Boxes and Hangars
- Full-Function Joystick at Platform
- PTO-Driven 10,200 Watt Hydraulic Generator
- 600 lb (272 kg) Side Load Capacity
- 2000 lb (907 kg) Lifting Eye
- Voice Communication System Between Platform and Cab
- Arbor Bar Collars and Strand Reel Lifting Chain
- Back-Up Alarm
- Boom Out-of-Rest Light in Cab
- Tow Line Winch
- Large Fairlead with Solid Rollers
- 6000 lb (2724 kg) Reel Lifter with Driver and Brake
- 2000 lb (907 kg) Strand Reel with Brake
- Reel Lifter and Strand Brake Control in Cab
|
| Optional Features: |
- 120 VAC Outlet with GFI Protection
- Boom/Cable Guard on Lower End of Boom
- Platform Curtains, Hard Side
- Hydraulic Capstan Winch
- Hydraulic Tool Circuit at Tailshelf
- Three Phase Inverters
- Platform Heater
- Lasher and Reel Tools
- Wood and Steel Reel Adapters
|
| Recommended Features: |
- Fall Protection System
- Wheel Chocks
|
*Based on chassis frame height of 40 inches (1016 mm)
Altec Aerial Devices meet or exceed all applicable ANSI Standards as of the date of manufacture. Altec reserves the right to improve models and change specifications without notice or obligation. Altec provides custom options in countries throughout the world. Please contact Altec Worldwide for the options available in your country.
