DR42B
Standard Distribution Digger Derrick
Designed to optimize job site efficiency, the Altec DR42B is a ride-on, all terrain digger derrick that facilitates access to utility work where typical trucks cannot.
This product has been discontinued. The recommended replacement model is the DR41B. If you own this product and need parts and/or service, please contact us.
| General Specifications: |
| Maximum Lift Capacity: |
8,900 lb (4037 kg) |
| Maximum Capacity at 10':* |
5,750 lb (2608.2 kg) |
| Maximum Sheave Height: |
42.3 ft (12.9 m) |
| Maximum Horizontal Reach from Centerline of Rotation: |
37.8 ft (11.5 m) |
| Boom Articulation: |
-16 to 80° |
| Digging Radius Minimum: |
15.4 ft (4.7 m) |
| Digging Radius Maximum: |
25.7 ft (7.8 m) |
| Control System: |
Electric / Hydraulic |
|
Download Spec Sheet
|
* Includes turret winch, pole guides, boom flares, no digger.
| Standard Features: |
- 5-Function HOP, Including Boom Down
- Full-Function Radio Controls for Boom with HOP Light Indicators
- ROPS and FOPS Certified Open Cab
- Hydraulic Tilting Pole Guides
- Hydraulic Side Load Protection (HSLP)
- Insulating, 46 kV and below
- All Boom Sections Extend/Retract Hydraulically
- Full Capacity Fiberglass Upper Boom
- Fixed Steel Boom Flares at Boom Tip
- Hydraulic Auger Release
- Tool Circuit
- Below Rotation: Two-way, adjustable flow up to 8 GPM at 2,000 PSI
- Above Rotation: Adjustable flow up to 5 GPM at 2,000 PSI
- Capable of Setting a 55 ft, Class H6 Pole
- Travel/Drive Tilt Alarm for 20° Side Slope and 25° Front-to-Back Slope
- Boom and Auger Stow Protection (proximity switch)
- Outrigger Controls at the Front and Rear of the Chassis
- 8,000 ft-lb Auger Motor (two speed hydraulic)
- Departure Angle of 30°
- Outrigger Interlocks (proximity switch)
- Outrigger Motion Alarm
|
| Optional Features: |
- Radio Remote Control Docking Station (for radio remote upper controls, ANSI compliant control interlocks)
- ROPS and FOPS Certified Enclosed Cab
- 15,000 lb Detachable Electric Recovery Winch
- 18,000 lb Detachable Electric Recovery Winch
- 30,000 lb GVWR Capacity Trailer
- Single Aerial Platform with 350 lb Capacity
- 8 ft Fiberglass Material Handling Jib
- Isolating Material Handling Jib with Winch (for use with platform)
- Pole Puller (includes chain)
- Hydraulic Tamp
- 800 lb Capacity Electric Capstan
|
| Recommended Features: |
- 5 lb Fire Extinguisher
- Triangular Reflectors/Road Flares
- Fall Protection Equipment
- Outrigger Pads
|
Altec Digger Derricks meet or exceed all applicable ANSI Standards as of the date of manufacture. Altec reserves the right to improve models and change specifications without notice or obligation. Altec provides custom options in countries throughout the world. Please contact Altec Worldwide for the options available in your country.
