DT105
Transmission Digger Derrick
The DT105 Digger Derrick is a hydraulically-actuated, continuous rotation, heavy-duty transmission digger derrick designed with steel load-bearing structures. It is the largest digger derrick in Altec’s DT Series reaching a height of 105 feet. The DT105 is an ideal unit for transmission maintenance and construction, but can also be used in a wide variety of applications.
This product is no longer offered
| General Specifications: |
| Maximum Lift Capacity: |
60,000 lb (27215.5 kg) |
| Maximum Capacity at 10':* |
49,650 lb (22520.8 kg) |
| Maximum Sheave Height: |
105 ft (32 m) |
| Maximum Horizontal Reach from Centerline of Rotation: |
94.75 ft (28.9 m) |
| Boom Articulation: |
-13 to 80° |
| Digging Radius Minimum: |
26.9 ft (8.2 m) |
| Digging Radius Maximum: |
45.3 ft (13.8 m) |
| Control System: |
Electric / Hydraulic |
|
Download Spec Sheet
|
* Includes turret winch, pole guides, boom flares, no digger.
| Standard Features: |
- Opti-View Riding Seat, 30 ton (60,000 lb), 105 feet Sheave Height, Articulating Boom Tip
- Out-and-Down Primary, Swing-Out-and-Down Auxiliary Outriggers
- Electric-Over-Hydraulic Outrigger Controls at Tailshelf
- Altec Load Moment Limiter (LML) Hirschmann Display at Riding Seat
- Dual Joystick, Electric-Over-Hydraulic Controls at the Riding Seat
- Engine Start/Stop at Riding Seat, Tailshelf, and Front Bumper
- 15,000 lb Digger Motor with Kelly Bar
- 15,000 lb Capacity Primary Winch with Grooved Drum, Tensioner and Third Wrap Indicator
- 36 inch Auger with capability to accommodate different kelly bars (2 5/8 inch, 3 inch). Boom Stow to Accommodate up to a 48 inch Auger.
- Non-Transferable Pole Guides Capable of Handling up to a 20 inch Diameter Pole
- Rota-Float
- Continuous Rotation
|
| Optional Features: |
- Flyjib, 16 foot fiberglass (46kV AC)
- Flyjib Cradle
- 48 inch Auger
- Two-Man Steel Platform, 1,200 lb Capacity
|
| Recommended Features: |
- Fall Protection System (When Personnel Platform is Furnished)
- Wheel Chocks
- Outrigger Pads
|
Altec Digger Derricks meet or exceed all applicable ANSI Standards as of the date of manufacture. Altec reserves the right to improve models and change specifications without notice or obligation. Altec provides custom options in countries throughout the world. Please contact Altec Worldwide for the options available in your country.
