LS60

LS60

Telescopic Aerial Device

Designed for lighting and sign maintenance, this non-insulating unit is built to be a man-lift aerial, but has versatile lifting capabilities. The 600 lb capacity platform can remain attached or remove in seconds for load line operation of up to 5,900 lb, which could potentially reduce the amount of equipment needed at your job site. Built with standard platform rotation and a 53 ft working side reach, this truck makes it easy for your crew to set up at a busy job site while taking up a smaller working footprint.

Request a Quote
General Specifications:
Ground to Bottom of Platform*: 55.7 ft (17 m)
Maximum Side Reach: 53.1 ft (16.2 m)
Boom Articulation (Lower Boom): -20 to 80°
Rotation: Continuous
Download Spec Sheet
Standard Features:
  • Non-Insulating Three-Stage Hydraulically Sequenced Telescopic Aerial Device
  • 60 x 36 x 45 in (1524 x 914.4 x 1143 mm) reach through
    Aluminum Platform with 600 lb Capacity
  • Hydraulic Self-Leveling Platform
  • Quick Disconnect Platform
  • 180° Platform Rotation
  • Single-Handle Electric/Hydraulic Proportional Joystick Controls
  • Out and Down Primary Outriggers
  • Hydraulic Overload Protection system (HOP)
  • Short Jacking Option using Rotational Interlocks on Outriggers
  • Down Only Auxiliary Outriggers
  • Engine start/stop at all Control Stations
  • Emergency power
  • Emergency stop at Upper and Lower Control Stations
  • Catwalk Over Chassis Cab for Platform Access
  • Outrigger motion alarm
  • Back up alarm
  • Truck level indicators
  • Minimum 25,999 GVWR Under CDL Chassis
Optional Features:
  • Multi-Handle Proportional Controller
  • Material Handling Attachment
  • 500 lb Capacity Platform Jib Winch Stowed at Platform
  • 5900 lb Primary Boom Winch with Anti-Two Block Switch
  • 2000 lb Primary Boom Winch with Anti-Two Block Switch
  • Primary Winch Cable Compression Roller
  • Weld Leads at Platform
  • Welder/Generator with Remote Start/Stop
  • 110V Power Source at the Platform
  • Trailer Tow packages
  • Thru-Box and Underslung boxes for storage
  • Flatbed Body Configurations with Wood or Steel Deck
Recommended Features:
  • Wheel chocks
  • Outrigger pads
  • Fall protection system

Related Articles

Raising Signs Well Without a CDL: Altec’s LS60

Designed for the lights and signs industry, Altec’s LS60 is a non-insulating, under CDL, telescopic aerial device with a working height of 60.6 ft and a side reach of 53.1 ft. The two-man aluminum platform has a 600 lb maximum capacity and rotates an industry-leading 180 degrees for easy accessibility when completing installations or maintenance […]

Read More

*Based on chassis frame height of 40 inches (1016 mm)

Altec Aerial Devices meet or exceed all applicable ANSI Standards as of the date of manufacture. Altec reserves the right to improve models and change specifications without notice or obligation. Altec provides custom options in countries throughout the world. Please contact Altec Worldwide for the options available in your country.