AC65E-155S

AC65E-155S

Telescopic Boom Truck Crane

The AC65E-155S is Altec’s largest and most capable dual rated product and is equipped with features that enable this machine to have both; class-leading material handling capacity as well as personnel lifting capabilities that rival most non-insulating aerial devices on the market today. As a material hoisting device, this machine features a maximum capacity of 130,000 pounds and is equipped with a six-section main boom with 155 feet of maximum extended length. As an A92.2 aerial device, the AC65E features a 1,200 pound two-person platform, a maximum working height of 216 feet, and an available side reach of up to 110 feet.

Request a Quote
Crane Specifications:
Maximum Lifting Capacity: 130,000 lb (58967 kg)
Boom: 155 ft (47.2 m), 6-Section Non-Insulated
Maximum Sheave Height: 215 ft (65.5 m)
Stowed Travel Height: 13.2 ft (4 m)
Vehicle Travel Length: 39 ft (11.9 m)
Outriggers:   Primary - 4 Position Swing Out-and-Down
  Auxiliary - 4 Position Swing-Out-and-Down
Download Spec Sheet
Aerials Specifications:
Ground to Bottom of Platform*: 211 ft
Maximum Side Reach 110 ft
Boom Articulation (Lower Boom): -10 to 81°
Rotation: Continuous
Chassis Requirements:
Gross Vehicle Weight Rating: 93,000 lb (42184.1 kg)
Front Axle Weight Rating: 20,000 lb (9071.8 kg)
Rear Axle Weight Rating: 68,000 lb (30844.3 kg)
Cab-To-Axle: 194 in (4927.6 mm)
Wheel Base: 280 in (7112 mm)
Standard Features:
  • 6-Section 155 ft Main boom with two extension modes for maximized lifting capacity across the working range
  • 4-position Swing-out-and-down Outriggers with independent control of swing, extend, and down jack functions
  • Altec LMAP (Load Moment & Area Protection) System with Smart-Zone Rating Functionality for Safe Asymmetric Outrigger Setups
    • Rated Capacity Limiter
    • Displays: Boom Length, Boom Angle, Load on Hook, Percent of Rated Capacity
    • Electronic Working Area Definition
    • Operator Defined Audible Alarm Set-Points for Boom Angle, Length and Rotational Position
  • Advanced E-series Electric over Hydraulic Unit Controls
  • Dual Entry 20° Tilt Cab with Heater and A/C
  • Outrigger Boom Interlock System
  • Winch Drum Rotation Indicator
  • Anti-Two Block Device
  • Winch and Boom Telescope Control at Hook Stow Point
  • 15,000 lb 2-Speed High-Performance Piston Winch
  • Rotation Resistant Wire Rope
  • Glide Swing
  • Altec Insights, Lifetime Access
Optional Features:
  • 12,500 lb hydraulically removable counterweight
  • 15,000 lb 2-speed Auxillary Winch
  • 2-stage 50 ft Hydraulic articulating jib (0° to -80°), 32 ft retracted
  • 2-stage 50 ft manual offset jib (0°,15°,30°,45°), 32 ft retracted
  • ANSI A92.2 Compliant Aerial Operation Package
    • Quick Attach 2-Man Aluminum Platform, 1,200 lb (544.3 kg) capacity
    •  Radio Remote Controls
    •  Lanyard Interlock System with Audible Alarm and Function Kickout
  • Platform Hydraulic Tool Circuit & Intensifier Package
  • Federal Bridge Compliant unit configuration
  • 15,000 lb 2-Speed Auxiliary Hoist
  • Hydraulic Tool Circuit at Tail Shelf
  • Altec Insights, 12-months Access
Recommended Features:
  • Wheel Chocks
  • Outrigger Pads

Altec provides custom options in countries throughout the world. Please contact Altec Worldwide for the options available in your country.