Introducing the TS40H-4P: Four Drum Puller

The TS40H-4P is the latest in Altec’s overhead cable handling products.

The TS40H-4P is the latest in Altec’s overhead cable handling products. This trailer-mounted, four-drum puller is Altec’s first product focused on the transmission and sub-transmission pulling markets. With streamlined controls, easy serviceability and the pulling capacity you need, the TS40H-4P delivers the Altec quality our customers know and expect.

Used to string bull rope or pull in the overhead, the TS40H-4P holds 15,000 feet of 5/8-inch rope per drum, with the option for 22,000 feet of 7/16-inch rope per drum. In some cases, the TS40H-4P can be used to pull in the conductor as well. Its Kubota engine is tier 4 final, meaning no DEF or DPF is required.

Key features of the product were designed with safety and efficiency in mind.

Fold Down Walkways Allow Easy Access

Fold down walking platforms on each side allow easy access for inspecting and servicing the equipment. The ability to fold up the platforms also gives it a smaller profile during travel.

The drums are hydraulically coupled with switches at the operator station, reducing the need for operators to get on and off the machine to manually couple or uncouple the drums during use. This significantly increases operator efficiency and safety.

High Quality Hand Brakes Are Easy to Use

The hand brakes are the first in the industry designed to allow ease of use during multiple pulling applications, including helicopter stringing operations. The number of turns required to fully actuate each brake has been significantly reduced, giving operators a more responsive controls experience with less operator fatigue.

Central Greasing System Means Easy Serviceability

For serviceability, the product has a central lubrication system that is standard for the drums and arbor bar bearings. All grease zerks for the drums and arbor bar bearings are conveniently located in a single location on the curbside and covered to protect them from the elements. This eliminates the need to climb around the equipment for standard maintenance, prioritizing safety by reducing slip trip and fall hazards and improving efficiency for service and maintenance.

Standard Features Include:

  • Full operator’s station with protective screen and adjustable seat
  • All controls for machine are centrally located at operator station
  • 15,000’ of 5/8 Synthetic rope per drum
  • Front and rear hydraulic jacks
  • Pull force up to 4,000 lbs.
  • Pulling line speed 4 mph.
  • Hydraulic drum engagement system
  • 74hp Tier 4 Final engine
  • Manual front jack override
  • Side access platforms
  • Central lube system for drums and arbor bar
  • Tarp cover system for rope protection
  • Lockable storage Box
  • Four grounding locations
  • Umbrella and holder
  • USB power outlet
  • Remote oil drain for ease of service
  • Battery charging studs and battery cut-off switch

To learn more about the product, visit the product webpage, contact your Altec account manager, or call 1-877-GO-ALTEC. More information on Altec’s range of cable handling equipment can be found here.