Quick Tips to Get You and Your Equipment Ready for Summer

The days of summer's sweltering heat are upon us. It's very important to prepare both you and your Altec equipment, including aerials, digger derricks, cranes and wood chippers for the hot temperatures. Here are some suggestions that will keep you operating efficiently when the temperatures are on the rise.

Order all of these items through an experienced parts representative at 1-877-GO ALTEC.

Preventative Maintenance

hydraulic oilOftentimes preventative maintenance, including inspections, regular lubrication and hydraulic oil changes, is overlooked or put off during the cold weather months. Now is a great time to catch up and ensure your equipment is ready to roll through the long hot summer! Altec carries everything you need from lubricants to Altec standard AW22i dielectric hydraulic oil at very competitive pricing.

  • PN 009900058- 5 Gallon Pail Altec AW22i Hydraulic Oil
  • PN 970681239- 55 Gallon Drum Altec AW22i Hydraulic Oil
  • PN 970696171- 275 Gallon Tote Altec AW22i Hydraulic Oil

Oil Temperature Monitoring Sensors

Temperature SensorDuring the summer, the oil in your unit can exceed safe operating temperatures, causing the hydraulic system to become inefficient. Altec Parts now carries the full line of Parker Bluetooth Sensonode wireless monitoring sensors, which will send data, including oil temperature and/or pressure readings, directly to your mobile device without slowing down your operations. The temperature sensors below do not require plumbing into the hydraulic system, allowing for ultimate ease of use.

  • PN 970706249- Clamp Style Sensonode Bluetooth Temperature Sensor, registers -40 to 257F
  • PN 970706250- Foot Style Sensonode Bluetooth Temperature Sensor, registers -40 to 257F
  • PN 970706243- -4 SAE Male Sensonode Bluetooth Pressure/Temperature Sensor, registers 0-5800 PSI and -40 to 185F

Oil Cooling Fans

Cooling FansAltec Parts also offers oil cooling fans that help reduce operating temperatures that exceed 140 degrees and can be installed on any mobile hydraulic application. Depending on the size of the oil reservoir and type of unit, a single or dual fan is needed to help keep your oil at an ideal operating temperature. Each kit includes an oil cooler, adapters, a temperature switch and a step-by-step list of install instructions.

  • PN 35690052- 1 Fan Option Oil Cooler-Aerial Unit
  • PN 35690055- 2 Fan Option Oil Cooler-Aerial Unit
  • PN 35690050- 1 Fan Option Oil Cooler-Derrick Unit
  • PN 35690051- 2 Fan Option Oil Cooler-Derrick Unit

Cooling Vests and Towels

Cooling GearWear a vest under your shirt to keep your core cool this summer. To activate the vest, place it in water for 30 seconds. After wringing out the excess water, the outer fabric will be dry while the internal fabric provides cooling for up to eight hours. The towels work by absorbing sweat and water to provide a natural cooling effect. To use, simply wet the advanced PVA material to activate, and wrap it around your neck, head or pulse points to provide cooling relief.

  • PN 9704-49464 Cooling Vest
  • PN 9704-49482 Cooling Towel

Evaporative Neck Shade

Neck ShadeNeck shades combine cooling comfort while protecting your neck from the sun. Made of a flame-resistant, lightweight material, these neck shades fit under your hard hat to provide all-day protection from the sun.

  • PN 9704-49478

Beat the heat this summer by ordering your parts today. Call 1-877-GO ALTEC to speak with an experienced parts representative. To learn more about Altec equipment, call 800-958-2555 or contact an Altec representative online.