Supported Models
Below is a listing of our supported models.
This list is valid for firmware release 2.4.0.48674, or later. Install the most current AXIS release for best performance. The following table identifies Altec equipment and features that are supported by AXIS.
Contact AXIS.Support@Altec.com with questions or for additional support.
| AXIS Service Interface – Supported Equipment | |
| AERIALS: | DIGGER DERRICKS: |
| A40P | DB37, DB41B |
| AA55+ | DR41/42B |
| AH75A / AH85A / AH100A | DL4X / DL4XB |
| AH75B / AH85B / AH100B | DM4X / DM4XB / DM4XE |
| AH125B, AH125S-A | DH45B/48B/50B, DH45E/48E/50E |
| AN55+ | DT65E |
| AP45A | DT80, DT85E |
| AT235 | DT105 |
| AT237 | |
| AT238P | GREEN FLEET: |
| AT248F | JEMS 1820/18E20 |
| AT335 | JEMS AM |
| AT37/41/48 ME/PE/SE | JEMS AT |
| AT41/48 MW/PW | JEMS BG |
| AT48-E58 PE | JEMS DC, JEMS DC+ |
| AT40G | JEMS LE |
| AT40GW | JEMS S |
| L42/45 M/P | JEMS SE |
| L42/44 E | EV, Freightliner eM2 |
| LS49 | EV, Kenworth K370E |
| LS63 | EV, Navistar eMV |
| T40P | EV, Peterbilt 567EV |
| TDA58 | |
| CHIPPERS: | |
| CRANES: | DC610 |
| AC40E | DRM12, DRM12HE |
| AC45E | DSC6 |
| AC65E | Modular Production System |
| CABLE HANDLING: | |
| AD108E | |
| LP108-ES | |
AXIS ALSO SUPPORTS EQUIPMENT WITH THE FOLLOWING FEATURES:
AA/AM/AN High Slope Operation, Derrick Chassis Slope Indicating System, LevelReady™ Slope Setup Aid,
Lanyard Detection System, AT Lanyard and Outlet Detection, Load Monitoring System, Smart Zone System,
EP-20, AT41ME/SE Rail Features, AN Platform-To-Ground, Proportional Outriggers, Winch Lockout,
Voice Alarm System, PDM-6A, AXIS hub (Altec TCU)
If you would like to request AXIS credentials, please visit our Registration page.
For an any AXIS related ideas or feedback, please visit our Feedback page.